Ademco 6151 fixed english keypad manual

ADEMCO 6152 6152V 6152ZN Remote Keypad User Guide

A ADEMCO 6148 Remote Keypad INSTALLATION AND SETUP GUIDE GENERAL INFORMATION The ADEMCO 6148 is an addressable remote keypad desned for use with ADEMCO control panels. The keys on the keypads are continuously backlit for convenience.

Honeywell 6151 Fixed English Keypad with

KEYPAD DISPLAY AND LEDS The ADEMCO 6148 keypad has a fixed-word display and a 2dit zone identifier.

Honeywell HONEYWELL INTRUSION <strong>6151</strong>


The following table describes the LEDs and their functions: Red (ARMED) Green (READY) Lhts when the system is armed in any mode. NOTE: TO REMOVE CASE BACK PUSH IN THE TWO MOUNTING SNAPS LOCATED ALONG THE BOTTOM OF THE KEYPAD AND LIFT UP.These key pairs may be used to activate panic alarms. To change the keypad's address, do the following: 1. Within 60 seconds of power-up, press and hold down the [1] and [3] keys at the same time for 3 seconds.


RETAINING SNAPS SPECIAL-FUNCTION KEY PAIRS The keypad also features special-function key pairs. The following key pairs are used by the ADEMCO 6148 to manually activate silent emergency, audible emergency, personal emergency, or fire alarms: • • • [1] & [✱] [✱] & [#] [3] & [#] SETTING THE KEYPAD ADDRESS The keypad can be set either for an address of 00-30, or to the non-addressable mode (31). Refer to the Installation and Setup Guide of the control panel being used for correct address settings and other details.

Ademco 6151 fixed english keypad manual:

Rating: 89 / 100

Overall: 95 Rates